+603-80747351

Cyclomix Mirco Mixing System

Cyclomix Mirco Mixing System

Description

ser-friendly precise and control mixing of 2 components materials.
With CYCLOMIXTM Micro, the mixing process is mastered and guaranteed. All technical fluid and application characteristics are fully configurable. Once programmed, CYCLOMIXTM Micro will automatically handle all parameters.
The programming is user-friendly and quick, with data in-putting by magnetic signal. Flushing and maintenance are very simple. In addition, the system can be controlled from inside the booth.
CYCLOMIXTM Micro+ allows the flushing of the catalyst fluid passages especially for water-based materials.
For acid catalyst it exists specific references for a CYCLOMIXTM Micro+ PH.
Safe zone installation where applicable (Directive ATEX).

  • Automatic component management: base, catalyst and solvent
  • Automatic flushing and material generation
  • Adjustable flushing volume. Several flushing sequence available: only Base side; Base side then Catalyst; Catalyst side then Base side
  • Operating pressure from 2 to 200 bar
  • Continuous ratio checking and alarm
  • User-friendly control panel
  • Stainless steel design
  • Recording of fluid consumptions add VOC with the possibility to print records (with RS 232 option)
  • Possibility to monitor the Cyclomix Micro from the spray booth (with the glass kit option)
  • Design of the mixing plate
  • Dosing +/-1 % and repeatability +/- 0.5%
  • Quick start-up, Minimal material and solvent wastage
  • Solvent savings and environmental protection
  • Allows to choose HTi, HPA, AIRMIX spray technlogies
  • The paint applied on parts always conforms to specifications
  • User-friendly and easy programming for the operator
  • To handle a wide range of materials
  • Fluid and solvent consumptions stored in memory
  • Ergonomy of the working station
  • Easy maintenance and spare parts standardization
  • Electrical Power: 115/230V – 75W
  • Trigger air pressure (bar mini): 4
  • Product pressure (bar): 2-200
  • Weight (kg): 25
  • Wetted parts: Stainless steel and PEHD, 316L stainless steel on PH version catalyst side
  • Mixing ratio: single component and 0,6/1 to 20/1
  • Mixing accuracy: 1%
  • Maximum number of gun to be fitted: 1
  • Mixed fluid output: 100-2000cm3/mn
  • Fluid viscosity: 30-5000cps
  • Height (cm): 17.3 (command cabinet) – 40 (dosing unit)
  • Width (cm): 36.6 (command cabinet) – 40.7 (dosing unit)
  • Depth (cm): 11.1 (command cabinet) – 30 (dosing unit)